75W90 RHD Gear Oil Synthetic Base Racing Heavy Duty Neo Synthetic Oil
$27.15 – $95.63
NEO 75w91RHD synthetic gear oil is designed to take 80% more load carrying capabilities than its competitors. NEO 75w91RHD is compounded with the most recently developed additive system to provide the ultimate in gear protection, from an E.P. wear, corrosive wear, and shock load wear standpoint.
NEO 75w90 RHD synthetic gear oil is designed to take 80 percent more load carrying capabilities than its competitors. NEO 75w90 RHD is compounded with the most recently developed additive system to provide the ultimate in gear protection, from an E.P. wear, corrosive wear, and shock load wear standpoint.
A friction modifier is also employed to reduce sliding friction resulting in lower energy requirements, thus less drag, lower fuel consumption, and more horsepower.
NEO synthetic gear oils offer both cold temperature advantages (Pour Point is -45 degree F) and high temperature stability (Flash Point is 480 degree F). As a multigrade product meeting the low temperature viscosity requirements of an SAE 75 W grade gear oil, but also meeting the viscosity requirement of SAE 90 grade at operating temperatures.
The base is a unique combination of synthetic components that permits meeting SAE 75w90 viscosity requirements without the need for a viscosity improver.
Extended Lubricant Utility
NEO 75w90RHD gear oil spans a wide range of viscosity classifications making it the first truly dependable All Seasons gear oil. This means it will flow and properly lubricate at the lowest winter temperature while providing the film strength for heavy duty operations during boiling hot summer driving conditions.
The advantages of such an oil have long been recognized as evidenced by the universal acceptance of multiviscosity motor oils.
Many lubricant manufacturers have previously offered multi-graded gear oils. These oils have been formulated with the conventional viscosity index improvers used to product multi-vis oils. But these additives, which work so well in motor oils, will not withstand the extreme pressures and shearing forces encountered in normal gear operation. Consequently, the advantages of multi-grading are lost after only a few thousand miles of service.
The new additive system used in NEO 75w90RHD is almost totally resistant to these forces. NEO 75w90RHD shows virtually no change in grade even after 50,000 miles of more of operation in heavily loaded, hypoid axle drives.
This means that in addition to the fuel savings generated, NEO will provide true year round performance in all climates from arctic cold to desert heat.
Additionally, it will provide superior all around performance in virtually all applications calling for gear oil rated from GL-2 through GL-6, in any viscosity grade from 75w, 80w90, or 90w. This can result in reduced gear oil inventories allowing a single lubricant to replace as many as 4 or 5 separate oils.
NEO 75w90 RHD gear oil is recommended for automotive type gear service in manual transmissions, differentials, transfer cases, over-drive units, oil lubricated wheel bearing, oil lubricated universal joints, steering gear boxes, or any other gear unit calling for a high quality heavy duty 75w90 hypoid type gear oil.
NEO 75w90 RHD also is recommended for use in all limited slip type differential designs. NEO 75w90RHD meets or exceeds performance requirements of Military Specification Mil-L-2105B, Mil-L2105-C, and API Specification GL-5, GL-6, and SAE Classification J306a.